Equipment

| Products | Prices | Newsletter |

Magyar    Româna

e-SENSE
GSM based, telemetric monitoring system
e-SENSE
e-SENSE is easy to install (Plug & Play), to manage and to maintain. With e-SENSE, you can manage and communicate with your sensors from your PC. You have an overview over the whole installation and you can change all the settings. This allows you to operate the system optimally with respect to response speed, data traffic costs and the use of batteries. The measurements and alarm signals are sent to a database in your own PC (e-SENSE direct) via the connection with the e-SENSE filed modem.
e-SENSE communication by sending data via SMS
The decision was taken to use a GSM/SMS-network. The reason for this was that the GSM-network now has an almost world encompassing range. Data communication by SMS is relatively inexpensive and the expectations are that prices will fall further in the near future. As far as this is concerned, this system distinguishes itself from other commonly used systems. Communication with these systems occurs via GSM-networks that depend on interaction between the sending and receiving modem.

e-SENSE enables two-way communication between the measuring element in the field and the central computer system. The data is sent from the sensor to the database. The settings of the sensors in the field can easily be changed from your workstation without having to go into the field. The e-SENSE system can indirectly generate an alarm.
e-SENSE system configuration for Diver applications
1) PC Modemset  
To facilitate communication between your PC and the e-SENSE-field modem, you need the PC-modem set for communication via e-SENSE direct. The complete set comprises a modem, a power source (100 – 240 Vac), an antenna, a communication cable and software.
2) Field modem  
The e-SENSE SMS-modem is used for GSM data communication with a Diver and an analogue sonsor. Power supply 3.6 Vdc. Readout and configuration via database.

Installation in the field, "Plug & Play"

The e-SENSE field modem is equipped with a function panel on the top side. When connecting the sensors to the e-SENSE modem while using watertight connectors, it will check whether the connected sensors work correctly. If desired, the current measurement values of the sensors can be checked using a laptop. The configuration of the measurement setup is sent in coded SMS messages to the database. This processes the messages and sends confirmation of receipt back to the measuring units. The e-SENSE modem indicates that everything is working correctly and the user can close the watertight fraud proof field housing with an easy mind.


 

Advantages
  • The modem can be used in mobile installations
  • Flexibility regarding the measurement parameters
  • Long lifespan
  • In addition to Divers, other e+ sensors can be connected
  • Alarm function
  • The batteries have the capacity to provide the whole installation with power for a year
3) Installation options for field modem

The e-SENSE field modem can be installed underground or above-ground. When installing the modem underground a monitoring well cover is needed. The cover is also available with an integrated antenna. For installation above-ground a protective casing of electro-zinced steel with a mounting hole for an external antenna can be provided.

4) Divers
All members of the Diver can be connected to the e-SENSE-system in any desired combination.
5) Communication cables for e-SENSE-modem
Communication cables to connect Divers to the SMS-modem are available in different lengths, varying from 1 to 200 m, with an IP68-connector for watertight connections.
6) Software
The readout and configuring of the Divers can occur through the e-SENSE-modem, via the software of e-SENSE direct.
 

| Home | About us | Software | Equipment | Contact |

E-mail: info@jaketa.hu
www.jones.hu

Copyright © Jakab és Társai Ltd. All rights reserved.